Lee Glass fiberglass air-jet loom is an air-jet weaving machine specially designed for weaving fiberglass fabrics; suitable fabrics are glass fiber-finish lacquered fabrics, laminated fabrics, and copper-clad laminates. The loom is suitable for the weaving of light, medium and heavy fabrics; it can be used for glass fabrics with a light weight of 50 g/m2 or heavy 300 g/m2. With the characteristics of less weft wear, large output, good quality, stable operation and low noise, it has a good cost performance advantage for users.

Lee Glass fiberglass air-jet loom adopts crank opening, can also use cam openings, 4-8 pages of heddle, single nozzle, main and auxiliary nozzles and special-shaped rakes, electromagnetic valve control weft insertion, four-link beating; automatic continuous Active double back beam electronic let-off; mechanical take-up, separate external large-volume device structure, independent servo drive, automatic tension control, maximum total winding diameter up to 1000mm; positive type electronic weft storage, mechanical Scissors, electro-optical detection device; strong suction device effectively absorbs the small fiber dust particles generated during the operation of the loom, to protect the operator's physical and mental health.

1. Model advance, high precision of configuration and processing, advanced technology, rigorous assembly, design speed up to 1400 rpm, minimum gas consumption of about 0.6m3/min, heald frames, solenoid valves, air pipes, bearings, transmission belts and electrical components All of them are imported. The main parts are completed by large-scale machining centers. The main material of the machine body is ball-mounted cast iron. The installation process uses platform positioning and laser correction. Through the above perfect combination, the stability and superiority of the equipment quality are guaranteed.

2. High-performance scrap-edge scissors mechanism: The waste edge is designed as a machete, and the mowing pad can be rotated along with the fabric surface to make the surface evenly worn, improve its service life, and facilitate user maintenance; at the same time, the cut edge of the cloth edge is greatly reduced. The situation of leaving feathers makes the cloths neat.

3, the perfect waste edge collection agencies: can be completely cut into the suction edge of the suction side of the suction box, not only to save the waste of the bead, but also can make the edges of the cloth neatly, avoid the bad side of the waste wire, wire and wire Wrinkles and other fabric defects; can control the scraps of the yarn within 5 centimeters, less than 5 centimeters waste of the same industry looms waste, greatly reducing the consumption; while avoiding the hair on the left side of the yarn recovery Blown into the air, causing air pollution, ensuring the cleanliness of the machine platform, thus greatly improving the working environment. The suction box can be cleaned once in 24 hours, reducing the labor intensity of workers.

4, constant tension cloth mechanism: cloth tension is controlled by the sensor, can ensure that the cloth tension is constant, the cloth quality is high, the cloth roll elastic uniform, neat; special varieties can be used to expand the shaft roller, so that the volume of the cloth is more perfect.

5. Pressure regulating system: The main jet pressure can be automatically adjusted according to the arrival status of the weft yarn, which reduces the weft breakage rate of the weft yarn. It is not only beneficial to improve the weaving efficiency, but also reduces the air consumption and achieves the best of both worlds.

6, professional design of a large pan head, large package, reducing the user on the shaft / falling number of times, correspondingly increased the weaving efficiency, pan head diameter 1000mm, the maximum diameter outside the machine roll cloth 1200mm.

7. The whole machine design is simple, compact and beautiful. Compared with other domestic similar products, the machine is more heavy and suitable for high-speed operation. The external type of let-off device is used to adjust the eccentricity. The front and rear of the loom are equipped with pedals. Stopper operation.