1. The integration of large panels; 410 models than the rack part of the design optimization; make the rack more stable, high efficiency, better fabric quality;
2. Optimized beating design; Beating force greater; suitable for high-density, high-speed fabric;
3.Also has a great improvement in terms of waterproof, can be widely used all kinds of fabric weaving, top speed can reach 1400 RPM.
4. For example, 75d fabric, the highest weft density : 82 pick per cm(208 pick per inch)

The main wall of the loom adopts high grade cast iron; the main beam adopts shaped seamless steel pipe; the whole frame is more stable, reducing the vibration during high-speed operation and ensuring the high quality and high output of the fabric. At the same time on the large wall panels, wall panels, side cover tempering treatment is not deformed.

The utility model has the advantages of increasing the size of the open connecting rod and the vertical shaft and the like; the double-bones and broadside (120mm) heavyweight heald frames ensure stable and reliable warp yarn openings at high speed and medium-thick weaving fabrics;

Sensitive optical feeders; from the original yarn to strong twist yarn, from low denier to high denier can be accurately detected; broken weft stop in time to prevent the occurrence of weaving defects.

Change from 3 row finger to five row finger; Enlarge edge rod and cloth guide  steel size; Power full temple make fabrics more stable.

The edge of the cloth is in the shape of a rope; the edge of the cloth is fastened and is not easy to be loosened; the thickness is basically the same as that of the ground, without chromatic aberration after dying; the aluminum alloy planetary gear wheel is provided with a light edge and low vibration for high speed operation; Nylon ring gear, reduce noise, easy to replace.

Suction pipe seat / weaving edge gear and so on all the anode hard film treatment; both beautiful and wear-resistant; sley, slide from aluminum to stainless steel parts; so that it not only increases the strength, but also increased corrosion resistance.

Easy operation; simplified equipment lubrication and maintenance; centralized turbid system to ensure the normal operation of equipment lubrication.

Crank rod mechanism inertial beat-up; crankshaft with high-frequency quenching and other special processing, improve the wear resistance, hardness and strength; rocker shaft diameter, using ⌀ 114 × 10mm seamless steel pipe; Recessed feet, enhanced strength, to ensure life; sley, slide stainless steel material to improve the beating force, can be woven high density and medium thick fabric, cloth tight, fullness.

The use of ceramic or carbide cutting edge; both sharp and wear-resistant; coupled with imported rod ends bearing, regardless of the thickness of weft, can be accurately cut off.

The use of Sweden SKF Germany FAG, Japan NSK imported bearings; the crankshaft quenching to further improve the degree of crankshaft wear and tear; extended service life.

Semi-positive continuous feed mechanism, bold double roller (⌀113mm) warp tension detection; with the most advanced stepless CVT to adjust the amount of feed; friction plate pressure device to prevent the sending and unwinding fluctuations; For medium-thick fabrics and to ensure that the tension through the tension and stability.

Small body design; Large output power, easy to adjust; Fully automatic operation of all kinds of fibers; Ensure that the weaving process is always in sync.

Make the warp tension remained stable; to meet the needs of a variety of fabrics; can improve the fabric grade; fabric varieties more convenient and efficient replacement, improve production efficiency.